| Author | Comment | |||
|---|---|---|---|---|
 Feffman |
Carbs to Manifold and Air Box |
Lead | ||
|
Registered Member
Posts: 81 08/05/09 11:14:55 |
Good Day All:
Are supposed to be circlips that hold the airbox to the rubber tubes on an SR3 with carbs? Or does the airbox get held on in the detents on the tube? Feff |
|||
|
|
||||
|
Feffman |
#1 | |||
|
Registered Member
Posts: 81 11/04/09 04:00:43 |
Well we got the Keihin carbs cleaned, bowl float height adjusted (9mm) and four carbs synchronized. Here's hoping the SR3 runs correctly at Road Atlanta
in a few weeks.
Feff |
|||
|
|
||||
|
Brownslane.diasio |
Good Luck and let us know | #2 | ||
|
Registered Member
Posts: 9 11/04/09 11:59:02 |
Feff, let us know how it all works out.
Tom |
|||
|
|
||||
|
Matt Graham |
#3 | |||
|
Registered Member
Posts: 415 11/04/09 17:45:21 |
Feff,
Missed your original post some how....... Don't know for sure about the carbs, but every Radical I've ever seen has worm-drive hose clamps holding the rubber "tubes" from the airbox to the carbs. The tubes are held into the air box with little detents in the "tubes". -Matt |
|||
|
|
||||
